Support all versions of FK72 and HPLA.
HPLA version all keys lost requires an extra JLR connector
Supports both add key and all keys lost by OBD
Lonsdor JLR License activated within few hours, won't be expired
For 2015-2018 Land rover and Jaguar write-to-start programming via OBD
This JLR key allows ID to be changed can also be used with other programmers capable of doing 15-18 JLR via OBD, i,e Autel/ Lonsdor/ Yanhua ACDP/ Xtool PAD tools.
2018-2021 JLR OBD AKL shares same license with 15-18 JLR, if you need to do 18-21 JLR via OBD, just get the 18-21 special key.
1pc X Lonsdor JLR Smart Key (315MHz or 433MHz)
1 JLR License ( Activated online)
2018 Range Rover Evoque is very difficult to program when lost all smart keys. Here we program it in a crazy easy what via OBD only. No EEPROM, No KVM out, no break the system.
This is a FK72 model. For HPLA version AKL, an extra JLR connector is required as well.
How-to: Program 2018 Evoque KVM system using OBD key
First, connect K518 obd cable to the vehicle
Located just below the driver side dash
First, select Immo and remote-> Land Rover ->Select from vehicle->Land Rover 2015-2018->Smart key->Select type 4 (program by obd)->All smart key lost and wait to connect
Choose all keys lost will delete the original key from system be sure before selecting
Update works for both FK72 and HPLA versions of KVM system
All keys lost, select cancel and confirm
Select desired key position and generate a working key
Place JLR OBD key to be generated into k518ise card slot, select ok to begin
Confirm use of Lonsdor dedicated key
Reading and witting key
Generated successfully. Confirm once the process complete, begin key testing by unlocking the vehicle
Key works straight.
The procedure is done in a few minutes very easy, program a brand new smart key no problem.