XTool InPlus IK618 Key Programmer with KC100 Adapter Supports Bi-Directional Control 31 Service Functions works with CAN-FD Adapter

Product Description

XTOOL InPlus IK618 Car Key Programmer Scan Tool with KC100 Adapter

Xtool InPlus IK618 combines advanced key programming and immobilizer capabilities with OE-level diagnostics, equipped with KC100 key programmer, performs key fobs programming, read PIN, read & write car keys & key chip, ideal for auto technicians, advance DIY, garage and locksmiths!
 

Highlights of Xtool InPlus IK618 Key Programmer

• IMMO & Key Programming
• OE Level All Systems Diagnostics+ Bi-Directional Control+ 31+ Service functions+ Advance ECU Coding & Guide Functions for VW
• Wider Vehicle Coverage
• Robust Hardware. Strong Hardward Configuration: Android 5.1 systems, 7'' Touch Screen, 5000mAh Battery, 1024*600 Resolution, Quad-Core 1.6GHz CPU Processor, 2G RAM & 32G,  Dual WiFi
• Online Support & LifeTime Warranty
• Supports CAN FD Protocols
• Supports Bluetooth function, but does not support wireless diagnostics
• Smart AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
• 2 Years Software Udpate & Support 14+ Languages & Remote Support 
• Option Adapters to Expand More Capabilities:

With KS-1 for Toyota/Lexus smart key all keys lost situation
Add M821 box for Mercedes-Benz all keys lost situation
AddM822 for Toyota 8A Chip blade keys lost keys situation
Add KC501 to proceed key programming for Mercedes-Benz/BMW/VW/Volvo, etc

Professional IMMO & Key Programming

XTOOL InPlus IK618 is a professional car key programming tool that can perform pro-level key programming and IMMO functions as below:

——Read PIN
——Add Transponder/Smart Key/Remote Learning, Disable Lo_st~Keys, Make Dealer Key
——Key Learning for BMW CAS4/3/2/1
——Key Programming for VW, Audi, Skoda, Seat, Bentley, 4th,5th, MQB IMMO
——Make Dealer~Key for Toyota & for Lexus (with KS-1 key programmer)
——Make Dealer~Key for Mitsubishi(with KS-2 key programmer)
——IMMO ECU Reset/Coding
——IMMO Data Backup/Restore
——Read & Write Key Chips
——Read & Write Mercedes Infrared Keys
——Read & Write EEPROM
——Detect Remote Frequency
 

KC100 Key Programmer

The KC100 Support for Volkswagen for Audi for Skoda 4th generation, 5th generation, MQB key matching Support for Volkswagen for Audi for Skoda 4-generation 96-bit online, 5-generation online, MQB online key matching Support for BMW CAS1-CAS3 + key matching Support for Land Rover's smart key write start function after 2015 Support for Fiat, for Fischer, 500, for Palio and other models Support for Toyota for Lexus all lost and disassembly-free, can realize 94, 98, 88, A8, A9, 39 simulation key generation。
 

NOTE: All the mentioned functions vary across vehicles. Please check compatibility with us before purchase!

IK618 support pull pin codes For Dodge Ram 2013-2018.
IK618 support pull pin codes For Dodge Charger/Challenger/300C 2015-2018.

IK618 support read pin codes from OBD for FCA Group(Fiat/Chrysler/Dodge/Jeep), via VPW protocol.

IK618 cannot support FBS4 infrared key for Benz.

OE Level All Systems Diagnostics + Bi-Directional Control

XTOOL IK618 car diagnostic tool performs OE-Level diagnosis on all available systems like ABS, SRS, TPMS, Engine, Transmission, Brake System and etc, with complete capabilities for codes, live data, active test, ECU information, which makes It an ideal choice for DIY auto Mechanic and repair shop.

Display live data stream in text or graph like misfire data, transmission fluid/Oil temperature, cylinder balance rates, engine rpm, mass air flow sensor data, fuel pressure, actual fuel temperature vs desired fuel temperature and etc;

Bi-Directional Control(Active Test): XTOOL InPlus IK618 bidirectional scanner supports active test to output the command into the ECU to request information or command a module to perform specific tests and functions. To find faults in the subsystems of your car effortlessly, without using the vehicle’s control.

IK618 bi-directional scan tool comes with OE level all systems diagnostic capabilities that you can only find in dealer-tool previously. It can scan all available systems to perform diagnostics including:

Pull Codes: including manufacturer-specific codes, pending codes, permanent codes
Clear Codes: Clear codes, reset monitors, and turn off warning lights
Live Data: Live data stream from various sensors including misfire, engine rpm, transmission fluid temperature and etc.
Freeze Frame: Retrieve parameters when DTC is recorded for better diagnostics.
ECU Information: Check ECU version and etc.
Active Tests: EVAP Tests, Test injectors, cooling fan, A/C Clutch, Windows, Doors, Sunroof, ABS Motor Pump, solenoids, relays and etc.30+ Reset Services

XTOOL IK618 auto scan tool comes with comprehensive service options including Oil Reset, EPB, SAS, DPF, BMS, Injector Coding, IMMO Keys, ABS Bleed, Throttle Relearn, Gearbox Match, Suspension Calibration, Headlight, Window Reset, Seat Match/Configurations, Tire Refit, Crankshaft Position Variation Learn, Airbag Reset, Disable Transport Mode, Electronic Pump Activation, EEPROM Adapter and etc.

8in1 Data Graphing: Graph up to 8 sensors' data individually on the same screen for better comparison. Data can be recorded, playback, or exported as CSV files
Auto-Vin: Retrieve the VIN# automatically to complete a fast scan
CAN FD Protocol: For faster data transfer and CANFD-Compliant vehicles (GM 2020+)

ECU Coding & Guided Functions & ECU Configuration

ECU Coding: For VW/Audi/Skoda Only. Perform Online Coding, Component Matching, Adaptive Data Reset, Control Modules Reflashing, Settings Customization, etc

Guided Function: For VW/Audi/Skoda Only. Provide instructions step by step when diagnosis or performing complicated functions
Flash Hidden Functions(ECU Configuration): For BMW/VW/Audi/Skoda/Toyota/Lexus/Scion/Mazda/Ford/Lincoln Only. Activate the higher-level car functions and disable annoying features

31+ Service Functions

Oil Reset: Reset service intervals after oil change and turn off the oil light.

EPB Reset: Reset brake pads after replacement of brake system.

SAS Adjustment: Perform calibration of the steering angle sensor

DPF Reset: Perform D*P*F regeneration

BMS Reset: Register the new battery to the ECU after replacement.

Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.

ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.

Injector Coding: Coding injectors after replacement.

Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.

Gear Learning: Crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the tablet to diagnose engine misfires more accurately.

Key Programming/IMMO: Disable the lost vehicle keys and program a new replacement key fob.

EEPROM ADAPTER: EEPROM chip stores the immobilizer data (like pincode) and odo~meter data, and sometimes you need to unsolder it to read & write the data inside the chip, flash the data, write start, data recovery, and so on.

Full Special functions: Steering position sensor calibration, Zero Point Calibration, Hybrid Control Compression Test, HVAC Control Module Calibrate, Injector balance test, ECU Configuration, VGT Turbo Calibration, Idle Learn Reset, Alcohol Content Reset, ABS Initialization, Seat Weight Sensor Calibration, Fuel Trim Reset, Crankshaft Sensors Relearn, Window Initialization, TPMS Reset, Air Suspension, Injector Coding, Airbag Repair, Cylinder Power Balance, Seat Configurations, Electronic Pump Activation, Disable Transportation, Performance Tire Upgrade, ECU configurations, A/F reset, Language change, Start/Stop Reset, etc.

Note: ALL the service functions available vary acorss vehicles. Please come to us to check compatibility with car VINs.

Add Extra Adapter to Expand more Advanced IMMO Functions (additional order required)

• KC501 needed/M821 Adapter needed For Mercedes-Benz All keys lost situation
• Chrysler 12+8 SGW cable needed for 2019+ models from FCA Group (for Fiat/Chrysler/Dodge/Jeep)
• KC501 needed For Land Rover/Jaguar 2015-18 key matching via OBD
• KS-01 Key Programmer needed For Toyota models with smart keys All keys lost situation
• Nissan CGW cable needed For Nissan Sylphy/Sentra (B18) 2019+ key programming
• KS-1/M822 Adapter needed All keys lost for Toyota models with blade keys (8A Chip)

14 Kinds of Language

English, Spanish, German, French, Portuguese, Italian, Finnish, Arabic, Japanese, Thai, Korean, Polish, Russian, Chinese

Note: If you need to modify the language, please provide the SN number to sales@obdii365.com

Xtool IK618 Functions:

OBDII	Suspension
Instrument Cluster	EEPROM
Power Balance	ECU Configurations
Language Change	BMS Reset
Transport Mode	Throttle
TPMS Rest	DPF
A/F Rest	ABS Bleeding
HV battery	Stop/Start Reset
Gearbox Match	EGR Relearn
Gear Learning	A/C Relearn
SAS	Windows Initialization
Oil Reset	VGT Relearn
EPB	Injector Coding
Headlight	Airbag Reset
Electronic Pump Activation	Tire Upgrade
Seat Match

Vehicle Coverage:

Key Programming Vehicle Coverage:

Asia: Toyota, Lexus, for Honda, Acura, Mazda, Nissan, Infiniti, Mitsubishi, Subaru, Suzuki, Kia, Hyundai, Daewoo, SSANGYONG, Proton, etc

Europe: Audi, for VW, Skoda, Seat, for Porsche, for Opel, Citroen, Peugeot, Jaguar, Land Rover, Lincoln, Renault, etc

America: GM, Cadillac, Buick, Chrysler, Ford etc

China: Great Wall, Chery, for Brilliance-auto, Geely, LIFAN, HAFEI, CHANGAN, LANDWIND, BYD, JAC, etc.

Support LADA and Russian Renault
Support Brazil Renault and GM with other Brazil car models
Support Perodua and Proton Malaysia car models
Support Renault Megane III with French car models

Abarth	Alfa Romeo	Aston Martin	Audi
Bentley	BMW	Citroen	Dacia
Ferrari	Fiat	Ford	GAZ
Jaguar	Lancia	Land Rover	Maserati
Maybach	Merc/CV	Mercedes	MINI
OPEL	Peugeot	Porsche	Renault
SAAB	SEAT	Skoda	Smart
UAZ	Vauxhall	Volvo	VW
VW-CV	Acura	Daewoo	Daihatsu
Honda	Hyundai	Hyundai CV	Infiniti
Isuzu	KIA	Lexus	Mazda
Mitsubishi	Nissan	Nissan GT-R	Perodua
Proton	Renaultsa Msunng	Ssangyong	Subaru
Suzuki	Toyota	Buick	Cadillac
Chevrolet	Chrysler	Dodge	GM
GMC	Hummer	JEEP	Lincoln
Pontiac	Saturn	BYD	Chery
Geely	Great Wall	JAC	Lifan
MG	Roewe	Holden

Xtool inPlus IK618 Specifications:

Items	Description
Operating System	Android 10
Processor	2
Memory	32GB
Display	7.0-inch touch screen with 1024 × 600 resolution
Connectivity	USB/Wi-Fi/Wired
Sensors	Gravity sensor, light sensor
Auto Input/Output	Microphone, dual speakers
Power and Battery	5000mAh, 3.65V lithium-polymer battery
Power Voltage	5V
Power Consumption	8W
Operating Temperature	-20 to 60℃(-4 to 140℉)
Storage Temperature	-40 to 70℃(-40 to 158℉)
Humidity	<90%
Dimension (L*W*H)	249*142*33.5mm
Live or not	Live
Weight	2.75KG

XTool IK618 Packing List:

1*P710 Tablet

1*KC100 Programmer 

1*EEPROM Adapter 

1*Power adapter for Tablet 

1*US Standard Charger 

1*EU Standard Charger 

1*VGA to DB15 Male Main Cable 

1*OBD2-16 Connector

1*USB3.0 Cable

1*Mini USB to USB-C Cable 

SUGGESTION:

---

We are here for you:

Skype: OBDII365.com
Email: Sales@OBDII365.com
Whatsapp : +86 18259252285
Business Whatsapp: +44 7418605489