Module 9 has been designed to read & write EEPROM/D-Flash data to mask a locked KVM unit. This software will safely read the EEPROM, D-Flash and P-Flash and decrypt the MCU to allow key programming. Due to the nature of ACDP no soldering or removal of components from the board is required.
Supports Land rover year -2015 add key and all keys lost via OBD
Freelander 2 2010-2014
Discovery 4 2010-2014
Range Rover 2010-2015
Note: For any vehicles between 2011 and 2014 we would recommend a Double CAN Adapter to work via OBD.
Supports Jaguar Land rover 2011-2019 OBD Add Key & AKL (July 2021 Free Update)
1: The new key must be an aftermarket key that can change the key ID. The original key is not supported.
2: Add key and program key when all keys lost via OBD
3: The programmed key comes with remote control, keyless and emergency start.
This double CAN adapter is not included inside acdp module 9 package by default, it comes with Volvo Module 12 by default; if you do nto have module 12, you can buy the Double CAN Adapter.
1. No disassembly, No soldering. No removing the crystal oscillator and capacitors on the KVM board, no damage to the KVM computer board.
2. Set anti-theft data reading and writing, anti-theft data calcuation, key programming in one
3. the interface board replaces the welding write, the pin connect with intelligent detection and the data reading and writing is safe and reliable
4.With the key refresh function, no longer afraid of loss caused by the key be locked
Package includes:KVM Module Interface Board