Yanhua Mini ACDP Gearbox Module List |
|||
No. | Module | Support Gearbox Model | Car brands |
1 | Module 11 BMW EGS Reflash | 1. BMW E series 8HP
2. BMW F/G series 8HP 3. BMW F series 6HP |
BMW |
2 | Module 13 VW/Audi Gearbox clone | DQ200 (0AM/OCW)
DQ250 (02e/0D9) DL382 (0CK) DL501 (0B5) VL381 (0AW) |
VW Audi Seat Skoda |
3 | Module 14 MPS6 gearbox clone | Volvo C30, C70, S40, S80, V40, V50, V60, V70, XC60, XC70 etc gearbox clone | Volvo |
4 | Module 16 Mercedes Benz gearbox clone | 1. VGS-FDCT/VGS2-FDCT gearbox clone (dual clutch)
2. VGS2-FCVT 722.8 gearbox clone 3. VGS2-NAG2/VGS3-NAG2 (722.9-2, 722.9-3) gearbox reflash |
Mercedes Benz |
5 | Module 19 SH725XXX gearbox clone | All, ZF 8HP, VW 0DE, 7DCT and DKG | BMW, Benz, Land rover, VW, Audi, Rolls-royce, Porsche, Bentley, Aston Martin, Lamborghini, Maserati, Jeep, Chrysler, Buick, |
6 | Module 22 GM 6T/6L Gearbox Clone |
|
GM, Buick, Chevrolet |
7 | Module 26 Ford DPS6 gearbox clone | Ford DPS6 gearbox clone | Ford Focus Ecosport Fiesta Aspire Figo, etc |
8 | Module 28 ZF 9HP gearbox clone | Support Jaguar, Land rover, Chrysler, Dodge, Fiat, Honda, Jeep and other models of the ZF-9HP gearbox boot mode cloning. | Jaguar, Land rover, Chrysler, Dodge, Fiat, Honda, Jeep etc |
*All modules require ACDP host to work with. |
How to Clone Ford DPS6 Gearbox TCU with Yanhua ACDP Module 26?
ACDP app will show you connection diagram
Follow diagram to connect ACDP, Module 26 interface board and gearbox
Run ACDP App, select Ford- Gearbox Clone- DPS6
Step 1: Check connection
connect ACDP with the gearbox
Detect TCU serial and hardware number and system information
Auto backup information
Select Step 2: Read and Write Data-> Full Backup Data
Read and save chip data
Back to Step 3: Disconnect
Disconnect TCU with ACDP
Connect the new DPS6 gearbox TCU and prepare to write the original data
Go to step 1 and check Connection as well
Go to Step 2: Read/Write data-> Full Write Data
Select chip data you saved in the previous step
Ready to write chip data, don’t cut the power nor pull out the device during the programming
Write chip data succeed
Save new data
Again perform Step 3 Disconnect
Ford DPS6 gearbox TCU cloning is completed.