Yanhua Mini ACDP tech released new module 28 to clone ZF-9HP gearbox in boot mode. Supports Jaguar, Land rover, Chrysler, Dodge, Fiat, Honda, Jeep and other models of the ZF-9HP gearbox boot mode cloning.
How to Clone ZF-9HP Gearbox with Yanhua Mini ACDP Module 28?
First of all connect interface with gearbox module follow the wiring diagrams
Step 2: Prepare ACDP host, OBD+ICP adapter, interface board, gearbox and other accessories required for operation.
Step 2: Confirm the location and definition of the test points for ZF-9HP gearbox computer
Step 3: Install the copper pillars
Step 4: Install the ZF-9HP boot interface board and lock it with copper pillars.
Step 5: Install the ZF-9HP port interface board to the gearbox interface
Step 6: Connect the ZF-9HP boot interface and the ZF-9HP port interface board with 8PIN cable
Step 7: Short the CAN resistor on the OBP+ICP adapter to the “CAN-R Join”
Step 8: Connect ACDP host, OBP+ICP adapter and ZF-9HP gearbox computer with 20PIN cable.
Run ACDP Mini App, go to Jaguar/Land rover-> Gearbox Clone->ZF-9HP (Boot)
Full read to backup data
Full write data
NOTE: For Honda, Fiat, Dodge and other models with 9HP gearbox, you enter same menu path as Jaguar Land rover.