Why do you buy Autel MaxiCOM MK808TS from OBDII365 ?
Autel MaxiCOM MK808TS Hightlights
Together with the ability to quickly read and clear DTCs for all available modules of the majority of the makes and models on the market, MaxiCOM MK808TS provides you with superior special functions, including Oil Reset, EPB (Electronic Parking Brake), SAS (Steering Angle Sensor), BMS (Battery Management System), DPF (Diesel Particulate Filter) and IMMO. In addition to OBD II diagnostics and special service, MK808TS enables you to carry out complete TPMS functions, including TPMS health check, sensor activation & programming and TPMS relearn.
Autel MaxiCOM MK808TS Description
ALL SYSTEMS DIAGNOSTICS
Besides featuring the quick and precise full OBDII functions, this automotive diagnostic scanner can also work on all available system modules in vehicles for technicians to diagnose complex problems accurately.
1.Read/clear codes for all available electronic systems;
2.Turn off warning lights;
3.Display live data in text, graph & analog for easy data review;
4.Supports all 10 test modes of the latest J1979 OBD II test specs;
5.Enhanced OBDII Mode 6;
To diagnose Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;
To diagnose Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;
To diagnose Fuel system if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;
To diagnose Transmission if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;
To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;
To diagnose Light System if you see rapid signal blinking or dimming lights.
And many more ...
The MaxiCOM diagnostic system supports 4 methods for Vehicle Identification.
1.Auto VIN Scan
The MaxiCOM diagnostic system features the latest VIN-Based Auto VIN Scan function to identify vehicles and scan all the diagnosable ECUs and run diagnostics on the selected system. This function is compatible with 2006 and newer vehicles.
2.Manual VIN Input:
For vehicles not supporting the Auto VIN Scan function, you may manually enter the vehicle VIN.
The Auto VIN Scan can be selected after selecting the test vehicle manufacturer.
When the vehicle's VIN is not automatically retrievable through the vehicle's ECU, or the specific VIN is unknown, the vehicle can be manually selected.
2 options available when accessing the Diagnosis section
1.Auto Scan –The Auto Scan function performs a comprehensive scanning of the ECUs in the vehicle’s system to locate and retrieve DTCs.
2. Control Units – displays a selection menu of all available control units of the test vehicle.
COMPLETE OBD2 FUNCTIONS
Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
ADVANCED SERVICE FEATURES
MK808TS provides the most commonly-performed capabilities including Oil reset, EPB / SAS / BMS / DPF / IMMO service as MaxiCOM MK808 & MX808TS does, to meet users’ demand for efficient repairs.
Oil reset service allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
EPB service plays an important role in the maintenance of electronic braking system’s safety and efficiency.
BMS service allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
DPF service specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
SAS service helps clear the faulty steering angle sensor memories and plays an important role in the steering angle sensor calibration.
IMMO is mainly used to disable the lost vehicle keys and program a new replacement key fob.
And Many More...
Widespread Coverage for Multiple Vehicle ModelsBest part about the MK808TS is its wide vehicle coverage.
Europe: Abarth, Alfa-Romeo, Alpina, AstonMartin, Audi, Bentley, Benz, BMW, Citroen, Dacia, Ferrari, Fiat, Jaguar, Lamborghini, Lancia, LandRover, Lotus, Maserati, Maybach, Mini, Opel, Peugeot, Porsche, Renault, Rolls-Royce, SAAB, Skoda, Smart, Volvo, Volkswagen
USA: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Hummer, Jeep, Lincoln, Mercury, Oldsmobile, Pontiac, Saturn, Tesla
1 pc *Autel MK808TS
Autel MaxiCOM MK808TS / MX808TS are ideal for DIYers and mechanics who want to find complex issues in the TPMS system. It can also find faults in other components which is why it’s a much recommended obd2 scanner.So if you are a mechanic who wants to work on TPMS, please choose Autel MaxiCOM MK808TS or MX808TS. Otherwise, Autel MK808BT is better, it have a lower price and Full system diagnosis.